The fans have a common "Axial Fan", two kinds of nuclear centrifugal fan. In the form of so-called this fan, fan along the axial type fan product forward fanout wind...
"AC Fan" Before installation, be sure to check the packaging is not intact, fans outside the nameplate parameters and the description is not consistent, is not satisfacto...
"Cooling Fan" no speed control function type Control Panel Operation: level control function (assumed: D for the high-water point, A point is the water level, B point of ...
"DC Fan" leaf number and amount of wind: when the speed has reached the limit, to increase the amount of wind, the only way to change the angle of the blades or vanes inc...
1. "Blower Fan" in the body due to the impeller operation without friction, require no lubrication, so that the exhaust gas is not oil. Chemical, food and other industrie...
"Exhaust Fan" ventilation methods are discharge type, inhaled, and with three. Discharged into the formula from the natural gas inlet air, dirty air is discharged through...
If "Cross Flow Fan" vent smaller resistance greater resistance layer, the pipeline flow is small, so that the lower cross-flow fan of the job requirements, at low flow ec...
"Axial Fan" blade pushing air with the shaft in the same direction flow. With the axial impeller and propeller products somewhat similar, it is at work, most of the flow ...
1, do not touch pressing "AC Fan" blades and power cord wrapped around with a fan or pull the power cord, the power cord and move the axis will be destroyed;
2, avoid du...
"Cooling Fan" continuously withdrawing the water tank with circulating pump and uniformly sprayed on the filter layer is formed by evaporation of water distribution syste...
